Please note: OBDII relearn is only available for model years 2021-2023.

Vehicle TPMS Information

Make:XPeng
Model:P7/Wing
Model Code:E28
Date of Manufacture:January 2021 - November 2026
OE Sensor Manufacturer:BAOLONG
OE Sensor Number:

8040002DA1

The following sensors are all compatible with: XPeng P7/Wing 2021-2026.

Direct Replacement Sensors

HSCH-S535

Schrader Pre-Programmed EZ Delta Clamp-In Sensor

Other Compatible Sensors

HSCH-S164

Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz

Schrader programmable EZ-Sensor 2.0 433Mhz EU. Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.... (more)

Service parts for the Baolong BHSens Clamp-In style sensor:

OE Parts

SCH-V012_10

Box Of 10 Snap-In Valves for Schrader Gen 4

A box of 10 Schrader snap-in valves. These valves are self-threading and suitable for use with Schrader gen 4 type sensors.

HSCH-V048_10

Box Of 10 Replacement High Speed Snap-In Valves for Schrader Gen 4

A box of 10 Schrader high speed snap-in valves. These valves are suitable for use with Schrader Gen 4 type sensors. A box of 10 ... (more)

SCH-V003_10

Box Of 10 Clamp-In Valves for Schrader Gen 4

A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap, 1 Screw and 1 Valve... (more)

AM Parts

H6-207

Box Of 10 Replacement Snap-In Valves for EU-Pro Hybrid 3.5 and Schrader Gen 4

A box of 10 snap-in valves. These valves are self-threading and suitable for use with EU-Pro Hybrid 3.5, OE-R HTS-3200 and Schra... (more)

HAM-V065_10

Box Of 10 High Speed Dual Fitment Snap-In Valves for EU-Pro Hybrid 3.5 and Schrader Sensors

A box of 10 snap-in valves, with each including 1 valve stem, 1 screw and 1 valve cap. These valves are self threading and suitab... (more)

H6-216

Box Of 10 Replacement Clamp-In Valves for Schrader Gen 4

A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve... (more)

H6-203

Box Of 10 replacement Clamp-In Valves for Schrader Gen 4

A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core. These val... (more)

You must be logged in to view relearn procedures.

Every effort is made to ensure that this page is as accurate as possible, however the information cannot be guaranteed.